Products Adaptors Työkalukartiot ja -pitimet, Kemmler ISO 26623 (PSK) Shrink chucks Shrink chucks 4,5° PSK 50 4250001091934
Shrink chuck 4,5°, ISO 26623, Polygonal shank

C5.70.18

EAN-code: 4250001091934
PSK 50
ISO 26623, Polygonal shank
VAT 0% 340,00 €
Checking availability
In stock, shipping time UPS Standard 1 week
You need to log in before purchasing. Request credentials here.
Ask about this product
Ask about this product
Description

Application:
For mounting tools with straight shanks.

Note:
Toolholders suitable for induction-, contact- and hot air shrink units. Ø 6 – Ø 32 with h6-tolerance

For Ø 3, 4 and 5 mm only solid carbide tool shanks must be used!
  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm² after DIN
  • All functional surfaces fine machined

 

 

Technical details
C5.70.06 2
Enlarge
Description Symbol Value
Body material code
BMC
false
Body diameter
BD
42 mm
Type
false
Overall length
OAL
false mm
Adaptive interface machine direction
ADINTMS
Capto (PSK)
Adaptive interface workpiece direction
ADINTWS
Kutisteliitos 4,5°
Balance grade
G2,5, 25.000 1/min
Adjustment range, axial
ADJRGA
10
Body diameter 1
BD1
false mm
Body diameter 2
BD2
false mm
Body half taper angle
BHTA
false
Body taper end diameter
BTED
33
Coolant exit style
CXSC
false
Clamping Ø, nominal, workpc. side
DCONWS
18
Data chip provision
DCP
false
Data chip provision size
DCPS
false
Diameter lock nut
DLN
false mm
Drive size
DRVS
false
Body length
LB
false mm
Body length 2
LB2
false mm
Length body diameter 1
LBD1
false mm
Length compensation compression
LCOMP
false mm
Functional length
LF
false mm
Protruding length
LPR
80 mm
Clamping length minimum machine side
LSCN
40 mm
Clamping length maximum machine side
LSCX
50 mm
Concentricity
< 3µm
Capacity
false
Nominal size
SZID
false
Tolerance class connection diameter
TDCON
h6
Thread designation inside
THID
M10 x 1
Connection thread nominal size workpiece side
THSZWS
false
Torque maximum
TQX
false Nm
max. concentricity deviation
false
Overall height
OAH
false mm
Overall width
OAW
false mm
Thread designation outside
THOD
false
Tolerance
false
Height
h1
false mm
Capto (PSK)
C5, PSK 50
Measure
x
false mm
Measure
y
false mm
Shank height
h/b
false mm